|
|
Visit Us At:
|
1561 Park Street
Peekskill, NY 10566 |
|
|
|
|
|
|
|
|
 
|
|
|
Available Colors:Blue/Purple/Red (shown)/Black (shown)
|
|
The brand new Hallman Pro Kit contains the Hallman Pro valve.
The new Pro valve is machined out of billet aluminum and stainless
steel pieces. The new design of the valve incorporates some great
new features not currently available on any other manual boost controller.
The Pro valve has been designed to not require the use of a lock
nut or any type or allen wrench(s) to be able to adjust your boost.
Simply turn the adjustment knob and it stays. Another great feature
is the fact that the adjustment knob cannot be lost or come out
of the valve. Simply put, there is not a potential for overboosting
since the adjustment knob cannot vibrate loose and come out. The
Pro kit also includes: 3 feet of vacuum line, mounting bracket,
hardware packet and complete installation instructions all in one
kit. This kit has all the installation hardware that is needed for
most all turbo installs. Plus, it comes with a mounting clamp to
hold the valve.
|
|
|
|
Available Colors:Blue/Purple/Red (shown)/Black (shown)
|
|
The brand new Hallman Pro RX Kit contains the Hallman Pro valve
with a ceramic ball, light and heavy springs, 3 feet of hose, mounting
bracket, hardware packet and complete installation instructions.
The Hallman Pro RX Kit is designed to allow very specific control
of boost. The RX kit has a ceramic ball instead of the 316 stainless
ball that comes in the Hallman ES valves . The ceramic ball only
weighs a fraction of what the stainless steel balls weighs. This
weight difference allows the ceramic ball to act very quickly as
it is constantly changing directions during operation. The ceramic
ball, in conjunction with the use of a lighter spring will allow
very fine adjustment of boost. Boost can be adjusted in half pound
increments very consistently with this valve. This kit is specifically
designed for turbo enthusiasts that want to add a few PSI of boost
over stock, and have a great amount of control over those few pounds.
This kit also includes the heavy spring for those that would like
to switch the spring and adjust to more than 5 psi of boost over
stock, and still take advantage of the quick-acting qualities of
the ceramic ball. The Pro valve has been designed to not require
the use of a lock nut or any type or allen wrench(s) to be able
to adjust your boost. Simply turn the adjustment knob and it stays.
Another great feature is the fact that the adjustment knob cannot
be lost or come out of the valve. Simply put, there is not a potential
for overboosting since the adjustment knob cannot vibrate loose
and come out.
|
|
Place an order through Paypal, please call
914 490 60380 and ask for Bill, or email billy@ultimate-cc.com
|
|
|